Page 1 of Philips dvp3055v dvd/vcr combi HACK
Hack Help Forum
Philips dvp3055v dvd/vcr combi HACK
could someone out there know of an available hack for above mentioned player
tks
RE: Philips dvp3055v dvd/vcr combi HACK
I cant find a hack for that particular model but there are 3 hacks for the DVP range, try this one first!:
Open the disk drawer
Go to the Set Up menu
Go to Preferences
Press the following sequence in the remote control: 135566
A menu indicating "Region Code" will appear.
Change region using down arrow until `0` is selected
Press "System Menu" to exit Set Up screen
Press Standby to save the setting
Restart
RE: Philips dvp3055v dvd/vcr combi HACK
Ok will have a try
tks
RE: Philips dvp3055v dvd/vcr combi HACK
Tried your first hack,but unlike other Philips players,there is no "Preference" page to start with. Do u have any more hacks?
Cheers
Jack
RE: Philips dvp3055v dvd/vcr combi HACK
I got the same problem. Check here :
www.dvd.reviewer.co.uk/forums/thread.asp?Forum=176&Thread=470201&Type=1
If you get a crack that work can you share it with me and I`ll do vice versa.
And you are right there is no "preference" page... :(
Good Luck.
This item was edited on Thursday, 11th August 2005, 15:23
RE: Philips dvp3055v dvd/vcr combi HACK
These are the only other dvp player hacks i can find at the mo(the ones without reference to a preference page), again not for your particular model but its worth a shot!:
1.
start the player without any DVD in it.
open the lid.
while the lid is open press 9,9,9,9,0
you should see region 0 displayed.
close the lid.
or
2.
Connect a TV to the DVD player
Open the CD cover
Press `display` on the remote control
Key 2 8 1 2
THEN
Press `OK` until `9` appears on the screen, up right
Press `display`
or
3.
1. Turn on the player.
2. Open the tray.
3. Press the following sequence on the remote: 7 8 9 OK 0
4. The number 0 will appear on the lower left side of your screen.
5. Your player is now region free! Put in a DVD and enjoy! :)
RE: Philips dvp3055v dvd/vcr combi HACK
tks very much for assistance however,hacks dont appear to work with this model,will keep on hoping though
Jack
RE: Philips dvp3055v dvd/vcr combi HACK
can you try following codes and let me know if anything works, I want to buy one
Notes: the folowing codes will turn your player into what is called "region-free". If you require the player to be a single region, for example region 1, then simply repeat the process and replace the "0" with a "1". This may be required if you have trouble playing DVDs purchased from outside the UK that have Region Code Enhancement technology on them. These titles are in a minority and you will find a substantial amount of titles will play without the need to change region. Our recommendation is that you set the player to region 0 and change to a specific region when the need arises.
DVP3005 / DVP5100
Press system menu on remote control
Go to preference settings
Press 1,3,5,5,6,6
Use Up and Down keys to select 0 and press OK
Press system menu on remote to exit
DVP520
Press system menu on remote control
Go to preference settings
Press 1,3,5,5,6,6
Press 0
Press system menu on remote to exit
DVP630
Open tray on DVD player
Press 7,8,9 on remote control
Press OK
Press 0
Press play on remote control to finish
DVD625 / DVD728 / DVP720SA / DVP762SA / LX3900SA / LX8300SA
Open tray on DVD player
Press 9,9,9,9 on remote control
Press 0
DVDR610
Ensure there is no disc in the tray
Press Tuner on the remote control
Press play 1,5,9 (the display does not change)
Press 1 (the display will then show the digits entered) 2,1,2,1,2,0,0,5,2,5,5, Play
The operation from point 3 onwards must be carried out quickly with no hesitation. Each button press must be within 2 seconds of each other. If there is too long a delay between button presses, the set will just revert to its original condition.
Play can be either pressed on the player or remote control
DVDR70
Switch on DVD recorder and make sure no disc is in the tray
Press the "SYSTEM" button on the remote control
Change the "REMOTE CONTROL USED" from "DVD RECORDER" to "DVD PLAYER"
Store this change (important)
On the remote control press "PLAY,1,5,9" (the display on the recorder will now display 11 dashes)
Now, using the remote enter the following 121 212 005 255 (last few digits won`t appear on the screen - but don`t worry)
Press "PLAY" on the remote
Switch off the recorder and wait for a few seconds
Switch recorder back on and using the remote control press the "SYSTEM" button. Change "REMOTE CONTROL USED" back to "DVD Recorder". Remember to store this change
HDRW720 / DVDR725H
Make sure no disc is in the tray
Press the disc menu on the remote control
Press play,1,5,9 (dashes will appear in the display)
press 1,2,1,2,1,2,0,0,5,2,5,5
Press play
DVDR520H
Make sure no disc is in the tray and the DVD player is switched on
Highlight exit on the on-screen menu
Press 2,9,6,0
Select required region
PET 700
Switch player on
Open tray door
Press setup on the remote control
Select preferences
Press 2,5,2,3,1,5
Press LEFT ARROW
Press DOWN ARROW
Press 0 when the screen displays region code
Press set up to exit
PET 800
Switch player on
Open tray door
Press setup on the remote control
Select preferences
Press 2,1,2,2,2,5
Press LEFT ARROW
Press DOWN ARROW
Press 0 when the screen displays region code
Press set up to exit
14PT6107 Portable TV with DVD Player
In TV mode, on the remote control press 0,6,2,5,9,6 and then press the MENU button
Select the "DVD" option on the menu using the arrow keys, and then press the RIGHT ARROW button
Highlight the "Region" option, and then use the RIGHT ARROW key to change the region from 2, to "ALL"
Exit by pressing the MENU button
If the above method does not work for your model, please use the following method:
Select DVD Mode (blue screen)
Using the remote control, enter 0,6,2,5,9,6
Press the "MENU" button
Select the "DVD" option by using the down arrow on the rmeote control
Press "OK" and the TV serial number and region code setting will be displayed on the screen
Using the remote control, enter the desired region code (e.g. press button 1 for region 1)
Press the standby button on the remote control
Pressing the standby key again will turn on the TV/DVD with the new region set
If the TV/DVD is set to region 0 (all region) the TV/DVD may ask for a DVD password; the default is 0711
RE: Philips dvp3055v dvd/vcr combi HACK
I HAVE FOUND A CRACK THAT WORKS ON THE PHILLIPS DVP3100V AND DVP3055V
Download the following packet and follow the instructions.
http://lgregionfree.tripod.com/2005/Hacks/6000.zip
Yes, it is for LG, but Philips has bought the DVD part
for this machine (OEM)from LG.
THIS DOES WORK
RE: Philips dvp3055v dvd/vcr combi HACK
IF YOU CANT DOWNLOAD FROM THE SITE I HAVE GIVEN BEFORE TRY
THIS PAGE AS THIS IS WHERE THERE IS A LINK ON THE PAGE .
SO WHEN THERE JUST RIGHT CLICK ON THE LINK AND SAVE AS
http://www.videohelp.com/dvdhacks.php?select=Philips+DVP+3100V