Page 1 of macrovision

Hardware Forum

macrovision

john1 (Mostly Harmless) posted this on Saturday, 7th July 2001, 10:20

i have a scan 2000 dvd.could any 1 please tell me how 2 disable the macrovision? thanks

RE: macrovision

damian grey (Harmless) posted this on Tuesday, 17th July 2001, 22:05

hi john
you may require a software update i think your best bet is to visit the scan 2000 users group as mentioned else ware in this forum

hopt this helps





Damian

RE: macrovision

WPKenny (Competent) posted this on Wednesday, 18th July 2001, 10:09

Can`t remember off hand the macrovision crack but go here and join up, there`s an FAQ which tells you all about it and if you`re really stuck just ask in the user group....

http://www.geocities.com/scan_group/

There`s the latest firmwares there too. You`ll find that some firmwares are video friendly and some are not. The FAQ will tell you how to find out what firmware you`ve got, then there`s a database section on the site which can tell you if that firmware is video freindly (able to remove macrovision) or not.

Hope that helps!

WPKenny

RE: macrovision

HighlandeR (Competent) posted this on Wednesday, 18th July 2001, 15:04

2.36v is the latest Firmware with VF (video freindly) off, BUT it wont fully disable Macrovision.

Too do that u need the MAC Master Scart too fully disable Macrovision.
Check below theres another Macrovision thread i posted the link there.

RE: macrovision

WPKenny (Competent) posted this on Wednesday, 18th July 2001, 15:34

There`s also a modified version of the 2.36 firmware available which IS video friendly. Just look for the 2.36VF rather than plain old 2.36. It`s up on the site.

Go back to Hardware Forum threads, or All Forum threads