Page 1 of PHILLIPS 701 WILL BE THROWN OUT OF THE WINDOW SHORTLY
Hack Help Forum
PHILLIPS 701 WILL BE THROWN OUT OF THE WINDOW SHORTLY
Please can someone please offer me some advice with the hack code for the dvd 701 i have tried everything now i am now on the brink of throwing it out of the window.I have followed all instructions given and nothing.I am using the one for all urc-7560.Please help for the sake of the poor dvd player if nothing else.
SIGNED VERY DESPERATE
RE: PHILLIPS 701 WILL BE THROWN OUT OF THE WINDOW SHORTLY
First you need to clear the device code already stored in your one4all. so if you want to set it up on you VCR button do the following.
Press VCR then press and hold the magic button (flashes once when pressed) wait till it flashes twice quickly, then enter 992 press VCR and VCR again. (wait till led has finished flashing about 2 seconds).
Now press the VCR button, Press and hold the magic button (flashes once when pressed) wait till it flashes twice quickly, enter 0539, press the magic button ( do not hold ) the led will flash once, enter 085 your DVD display now will show ----------- on you philips dvd remote enter 222222005255 then play.
The display shows no disk, Power off 10 sec. Switch on.
RE: PHILLIPS 701 WILL BE THROWN OUT OF THE WINDOW SHORTLY
I HAVE TRIED ALL THIS AS I READ ON THE FORUM THAT A GENTLEMAN HAD THE SAME PROBLEM I HAVE TRIED DOING ALL OF THE ABOVE ON THE VCR BIT AND DVD BIT ON THE ONE FOR ALL I BOUGHT THIS REMOTE FOR THIS BUT I DON`T THINK MY DVD PLAYER WANTS TO PLAY BALL PLEASE HELP ANY OTHER IDEAS IT`S DRIVING ME MAD.
RE: PHILLIPS 701 WILL BE THROWN OUT OF THE WINDOW SHORTLY
Are you are doing this in front of the DVD? you must be within a few feet and the remote must be pointing towards the DVD.
You`ve got a DVD button on that remote, so just program it on that.
Go here http://www.electrouk.pwp.blueyonder.co.uk/ and press no1 on the remote it tells you how to programme it an the dvd button.
RE: PHILLIPS 701 WILL BE THROWN OUT OF THE WINDOW SHORTLY
reply with the extact details of what you have tried - STEP by STEP
there is no reason why this wouldn`t work....so we have to establish what you are doing wrong..