Page 1 of THOMSON DTH5000-U HACK?????

Can anyone give me an idiot`s guide to hacking into this DVD plater please so I can play region one discs?

Many thanks!

DTH-3300
DTH-3600
DTH-3700
DTH-4000
DTH-4200
DTH-4500
DTH-5000
DTH-5200
DTH-5400 1. Make sure that there is no disc in the tray and switch on the player.
2. Cold start the player, by holding down the PLAY and STOP buttons on the player.
3. You should see a set of language options. Release the PLAY and STOP buttons.
4. Select your language.
5. Press REPEAT then the following codes for the required region the player is already set to (region you bought the player in):
Region 1 - 2, 9, 3, 3, 4
Region 2 - 3, 8, 7, 6, 7
Region 3 - 5, 6, 7, 3, 2
Region 4 - 7, 6, 8, 8, 4
Region 5 - 5, 3, 8, 1, 4
Region 6 - 2, 4, 4, 6, 2

6. A code will appear, indicating the region setting of your player.
7. Press 9 for region-free, or 1 for region 1, 2 for region 2, etc.
8. Press OPEN/CLOSE on the Player to open the disc tray.
9. Press STANDBY (POWER) on the remote control to close the tray. Next time the player is turned on it will set to the region specified. If the player halts on the FBI Warnings, press Forward Search x2 or faster.

10. Macrovision can also be disabled here.

Note:


Yes, for 3300, 3700, 4000, 4500, 5000, 5200, 5400(needs re-confirming)

I have just done the region mod on a DTH 5000. But in the previous post you say in step 10 that the Macrovision can also be disabled here.
HOW ?
All I saw was the figure 02 which changed to 09 at step 7.
There is no other menu .
Or does changing ther unit to Region free also switch off the Macrovision
Larry