Page 1 of Help PC won`t reach POST

PCs & Mobiles Forum

Help PC won`t reach POST

happy (Competent) posted this on Thursday, 21st April 2005, 17:24

My brother`s PC gives error (on bootup) "CPU fan not working" and instead of the POST bleep, I get continious clips...

Fan is working and have tried a new one (just on case the old one was running slow).

Any ideas?

If you put your mind to it, you can accomplish anything BTTF

This item was edited on Thursday, 21st April 2005, 18:27

RE: Help PC won`t reach POST

clayts (Elite) posted this on Thursday, 21st April 2005, 23:55

Don`t talk to me about PCs failing to POST - exactly what I`ve got on my Staples Xmas bargain - mind you, twas me own fault for inserting the CPU upside down and pressing ON I s`pose, when I changed the heatsink and fan :0

I wonder whether your motherboard is an Asus KV8 model ? This is a common problem with a run of Asus boards (some sold by eBuyer), which ends up being a catch 22 : you need to update the BIOS chip on the PC, but you can`t do that as the PC won`t progress beyond POST - the only way to rectify this is either to RMA the faulty board, or send the BIOS chip off to Asus and get them to send a new one.

Actually, your PC is reaching POST (power on self-test), what it isn`t doing is loading the BIOS, as the POST identifies there is a problem.

The most common cause for errors of this type (believe me, I know this as I have researched it thoroughly - stuck the replacement CPU in and still can`t post) are :

- check the memory is installed correctly - it could have wiggled loose (try removing one strip if you have two)
- problem with the video card - check this is installed properly
- the CPU may not have full contact with the heatsink and is thus overheating : luckily for you, the BIOS has a built in temperature sensor, protecting the CPU from overheating any further, and thus results in obscure error messages
- the PSU is on its way out
- the motherboard is FUBAR

Do you get any beeping noises from the PC ? Quite often these beeps mean something and can assist troubleshooting - need to know what BIOS you use - eg Phoenix, Award, etc

Something must have happened for this error message to appear- was there any hardware changes made ?



===========================

Clayts, Moderator, DVD Reviewer
UK webmaster for Area 450 the independent Sampo/Maxent DVD site

RE: Help PC won`t reach POST

happy (Competent) posted this on Friday, 22nd April 2005, 06:47

Hi Clayts, glad to hear your an expert in POST ;)



Quote:
Do you get any beeping noises from the PC ?

blips at maybe 3 to 5 per sec

Quote:
the CPU may not have full contact with the heatsink and is thus overheating

the fan/heatsink are seated flush to cpu

Quote:
the motherboard is FUBAR

I suspect that this is f**ked




As for the pc, the memory/cpu/graphic cards have all been removed cleaned and reseated.




If you put your mind to it, you can accomplish anything BTTF

RE: Help PC won`t reach POST

blodwin (Competent) posted this on Friday, 22nd April 2005, 10:12

Hi

I would find out the motherboard maker and have a look at the site for any problems and fixes for the model you / or brother have.


bye

R.B

RE: Help PC won`t reach POST

clayts (Elite) posted this on Friday, 22nd April 2005, 18:39

See if you can work out here which beep code relates to your situation

===========================

Clayts, Moderator, DVD Reviewer
UK webmaster for Area 450 the independent Sampo/Maxent DVD site

RE: Help PC won`t reach POST

W@yne (Elite) posted this on Saturday, 23rd April 2005, 01:51

Quote:
the only way to rectify this is either to RMA the faulty board, or send the BIOS chip off to Asus and get them to send a new one.


Or there is a very nice man in Holland www.flashbios.org/ that will flash your Bios chip with your chosen bios file for the grand total of €10.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


RE: Help PC won`t reach POST

happy (Competent) posted this on Saturday, 23rd April 2005, 12:23

I can confirm its the mother board (by substitution)....

Thanks for the advice all.

If you put your mind to it, you can accomplish anything BTTF

Go back to PCs & Mobiles Forum threads, or All Forum threads

Preferences

Site colour
Site style
WYSIWYG editor